Versalift SST-36-NE – SOLD

Call 605-880-5795 for Price

Stock #: 4259-1 Categories: , , , , ,


We are pleased to quote the VERSALIFT SST-36-NE a non-insulated, end mounted 35 ft. 6 in. (10.8 m) telescopic articulating aerial platform lift, 40 ft. 6 in. (12.3 m) working height including the following standard and optional features:

  • Standard platform capacity of 350 lbs. (158.7 kg).
  • Upper controls consist of a series of spring-loaded toggle switches and a master control switch.
  • Engine start/stop system with controls at platform and remote handheld lower controls.
  • 370° non-continuous rotation with a mechanical stop.
  • Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cm)
  • External hydraulic oil reservoir with 6 gal. (23 l) capacity.
  • Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
  • 5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom housed within the outer boom.
  • End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fiberglass platform.
  • Manual rotator for platform.
  • Master/slave hydraulic leveling with upper control to tilt for cleanout or rescue.
  • Non‑lube bearings used at all pivot points.
  • Multi‑link hose carrier system through booms.
  • Rubberized boom cradle.
  • 12 Volt DC backup pump providing power to all boom functions.
  • Mounting hardware for chassis/cab installation.
  • Handheld remote lower control with series of spring-loaded toggle switches and control selector switch
  • GFCI receptacle for 120 Volt power at platform.
  • Full body harness and lanyard.
  • Painted standard white urethane.
  • Two operator’s manuals and two service manuals.
  • ANSI A92.2 data plate.


Steel Service Body 108” Long x 40” High x 94” Wide:


  • 12-gauge tread plate floor with 6” structural channel frame
  • 40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
  • Stainless steel automotive rotary type door latches.
  • Chain stops on all doors
  • Rubber rolled crown type fenders
  • Removable composite tailboard installed at rear.
  • 30” tread plate tail shelf with 7-lamp light bar installed.
  • Master locking system.
  • Curb side compartments as follows: –
  • 1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4-inch centers
  • Horizontal: Open
  • Rear Vertical: Two (2) adjustable shelves with adjustable dividers on 4-inch centers
  • Street Side Compartments as follows: –
  • 1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4-inch centers
  • Horizontal: One (1) removable shelf with dividers on 6-inch centers
  • Rear Vertical: Five (5) fixed material hooks (1-3-1)


Cab and chassis to the following specifications:


  • 2022 Ford F-550 4×4 Extended cab and chassis with a 60” cab to axle.
  • 19,500 lb. GVWR.
  • 6.7L Power Stroke V8 diesel engine.
  • 10-speed automatic transmission.
  • Power equipment package
  • Platform running boards.
  • Engine block heater.
  • Rear camera and prep kit.
  • Extra heavy duty front end suspension
  • Payload plus package upgrade
  • XL value package including cruise control.
  • Trailer brake controller.
  • High capacity trailer tow package.
  • Operator commanded regen.
  • Painted Oxford White.

Installation to include the following:


  • Install VERSALIFT SST-36-NE, mounting hardware, and PTO and pump.
  • Install rear torsion bar.
  • Install and paint service body and accessories.
  • Install ladder rack with hold down and locking feature.
  • Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill
  • Install Dimensions 2000-watt Pure Sine inverter with battery and box (curbside front compartment)
  • Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connectors
  • Install mud flaps, back up alarm and park brake interlock system.
  • Furnish fire extinguisher, 3-piece triangle reflector kit and pair of rubber wheel chocks.
  • Test ride completed unit for 1 hour.
  • Test and certify per ANSI A92.2.